Section 5: Parts and Module Replacement
11. Loosen the single thumbscrew securing the
light dump and remove.
12. Using the hex tool provided, loosen the
three captive screws securing the light
engine in place.
13. Using the built-in light engine handle,
carefully lift the light engine assembly out
of the projector. (Figure 5-44)
14. When installing, repeat above instructions in
reverse. Reshoot MCGD files, align the
aperture and adjust convergence. For details,
refer to
Section 3 Service
5.11 Power Supplies
5-30
Setups.
Figure 5-45 LVPS Compartment
Figure 5-44 Top View of Light Engine
CP4230 Service Manual
020-100622-04 Rev. 1 (05-2016)