5.11.3 AC Terminal Block
The AC Terminal Block is located under the IOS and is accessible from the bottom of the projector.
(Estimated Replacement Time: 20 minutes)
1. Loosen the two screws securing the cover plate to the bottom of the projector.
2. Disconnect the four AC connections and the ground connector.
3. Using a #2 Phillips
(Figure 5-48)
CP4230 Service Manual
020-100622-04 Rev. 1 (05-2016)
, remove the two screws securing the AC terminal block to the baseplate.
™
Figure 5-48 AC Terminal Block
Section 5: Parts and Module Replacement
5-33