Christie CP4230 Service Manual page 43

3. In the Arming window, tap the Arm Marriage button. (Figure 3-14). A 30 second count-down timer
begins. (Figure 3-15). The LED in the Marriage button on the PI Board will flash green during this
count-down. You MUST press the Marriage button on the PI Board within this 30 second window in
order for the marriage to take effect. When the Marriage button is pressed, the LED button will change to
a solid green to indicate a successful marriage.
Figure 3-15 Press Marriage Button on PI Board after tapping Arm Marriage Button
4. The Finish window states if the marriage was successful or not. Tap the Finish button to return to the
Main panel.
CP4230 Service Manual
020-100622-04 Rev. 1 (05-2016)
Section 3: Service Setups
3-15