Mutegil -- Set Mute Status Of Line Inputs As A Group - Polycom Vortex EF2211 Programming Manual

S01MMUTE1,*,0110100000
S01MMUTEA,*,0
S01MMUTEA,*,2
S01MMUTEA,*,?
8.106. MUTEGIL -- Set Mute Status of Line Inputs as a
Group
This command sets the mute status of all the line inputs simultaneously. This is different from using a
wildcard, * with the
while the MUTEGIL sets only the line inputs.
This command will generate acknowledgements from each of the line inputs separately.
This command is a boolean command. See
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
preset.
Example Description
S01MUTEGIL1 Mute all line inputs.
Set all crosspoint
mutes for input
channel 1. Mute the
paths from input 1
to outputs A, B, and
P and unmute the
paths from input 1
to outputs 1, T, R1,
and W-Z.
Unmute all
crosspoints for input
channel A .
Toggle all crosspoint
mutes for input
channel A .
Query all crosspoint
mutes for input
channel A .
command because that command sets all the mic and line inputs together,
MUTEI
S01MMUTE1,*,0110100000
S01MMUTEA,*,0000000000
S01MMUTEA,*,abcdefghij , where the value
of each of letters (a, b, etc.) is either 0 or 1
depending on the current state of each of the
crosspoint mutes. If this command was issued
after the example above, then the status
message would be
S01MMUTEA,*,0000000000
S01MMUTEA,*,abcdefghij , where the value
of each of letters (a, b, etc.) is either 0 or 1
depending on the current state of each of the
crosspoint mutes. If this command was issued
after the example above, then the status
message would be
S01MMUTEA,*,0000000000
Section 6.1 for more information on this type of command.
Status Message
S01MUTEIA1
S01MUTEIB1