Mini -- Enable Modem Initialization String; Ministr -- Set Modem Initialization String - Polycom Vortex EF2211 Programming Manual
Rs-232 command set
Hide thumbs
Also See for Vortex EF2211:
- Brochure & specs (2 pages) ,
- Reference manual (66 pages) ,
- Application note (36 pages)
Table of Contents
Advertisement
Query enabled status of microphone gain
S01MIC1?
stage for input channel 1.
8.103. MINI -- Enable Modem Initialization String
This command controls whether or not the modem initialization string is sent at power-up. If MINI is
0, then the modem initialization string is not sent. If MINI is 1, then the modem initialization string is
sent. The text of the modem initialization string is set via the
This command is a boolean command. See
This command is saved to global non-volatile memory and is not part of a preset. Its value is saved
each time it is changed. It will retain its value after power-down. Since this command writes to non-
volatile memory, there will be a delay before an acknowledgment is returned.
Example Description
S01MINI1 Enable modem initialization string.
S01MINI0 Disable modem initialization string.
Toggle enabled state of modem initialization
S01MINI2
string.
Query enabled state of modem initialization
S01MINI?
string.
8.104. MINISTR -- Set Modem Initialization String
This command is used to set or query the modem initialization string. The string can be a maximum of
32 characters long. The recommended modem initialization string for the Vortex is:
ATF1E0&B1S0=2
This can be set via the following command.
S01MINISTRATF1E0&B1S0=2
Whether or not the modem initialization string is sent at power-up is controlled via the
command.
This command is saved to global non-volatile memory and is not part of a preset. Its value is saved
each time it is changed. It will retain its value after power-down. Since this command writes to non-
volatile memory, there will be a delay before an acknowledgment is returned.
S01MIC1x , where x is 0 or 1 depending
on the current enabled state of the
microphone gain stage on input channel
1.
MINISTR
Section 6.1
for more information on this type of command.
Status Message
S01MINI1
S01MINI0
S01MINIx , where x is 0 or 1 depending
on the current enabled state of the
modem initialization string.
S01MINIx , where x is 0 or 1 depending
on the current enabled state of the
modem initialization string.
command.
MINI
Advertisement
Table of Contents
