Amlmn -- Set Microphone That Will Remain On In Manual Last Mic On Mode - Polycom Vortex EF2211 Programming Manual

Disable "last mic on" mode for automixer
S01AMLMM10
1.
Set "last mic on" mode to manual for
S01AMLMM11
automixer 1.
Set "last mic on" mode to automatic for
S01AMLMM12
automixer 1.
Query the current setting of "last mic on"
S01AMLMM1?
mode for automixer 1.
8.23. AMLMN -- Set Microphone That Will Remain On in
Manual Last Mic On Mode
This command sets the microphone number that will remain on when "last mic on" mode is set to
manual (see the
AMLMM
automixer (always 1 on the EF2211) that will be adjusted. The second argument is the microphone
number (always 1) that should be gated on if no other mics are gated on and
The value of the AMLMN command is only valid when
This command is not particularly useful on the EF2211 since there is only one mic on this device.
However, it is provided in order to be consistent with the command sets of the other Vortex devices.
Even though this is a channel integer command, use of the wildcard character for the automixer
number is not supported.
This command is a channel integer command. See
on this type of command. The minimum and maximum values for this command are 1 and 8,
respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
preset.
Example Description
Set microphone 1 as the manual last mic
S01AMLMN11
on for automixer 1.
Query the current manual last mic on
S01AMLMN1?
number mic for automixer 1.
8.24. AMNOM -- Set Local Maximum Number of Open Mics
command). The first argument to this command is the number of the
S01AMLMM10
S01AMLMM11
S01AMLMM12
S01AMLMM1x , where x is 0, 1, or 2
depending on the current setting of "last
mic on" mode for automixer 1. If this
command is issued after the example
above, then the status message will be
S01AMLMM12 .
is set to manual.
AMLMM
Section 6.3 and Section 6.2
Status Message
S01AMLMN11
S01AMLMN1x , where x is always 1, since
there is only 1 mic on this device.
is set to manual.
AMLMM
for more information