Vtxmodo -- Enable Vtx Mode On Specified Inputs - Polycom Vortex EF2211 Programming Manual

S01VTXMODIB0 Disable VTX mode on input B.
Toggle status VTX mode on input
S01VTXMODIB2
B.
Query status of VTX mode on
S01VTXMODIA?
input A.
S01VTXMODI*1 Enable VTX mode on inputs A-B.
S01VTXMODI*0 Disable VTX mode on inputs A-B.
Enable VTX mode on input A and
S01VTXMODI*10
disable VTX mode on input B.
Toggle status of VTX mode on
S01VTXMODI*2
inputs A-B.
Query status of VTX mode on
S01VTXMODI*?
inputs A-B.

8.155. VTXMODO -- Enable VTX Mode on Specified Inputs

Vortex devices can be connected to a Polycom VTX 1000 in order to use the wideband capabilities of
that device. When connecting to a VTX 1000, special proccessing is done on the Vortex in order to
guarantee compatibility with the VTX 1000. This command enables processing for the VTX 1000 on
the specified line output or outputs.
This command is a channel boolean command. See
on this type of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
preset.
Example
S01VTXMODO11
S01VTXMODOA0
S01VTXMODO12
Description
Enable VTX mode on output 1.
Disable VTX mode on output A. S01VTXMODOA0
Toggle status VTX mode on
output 1.
S01VTXMODIB0
S01VTXMODIBx , where x is either 0 or 1
depending on the current status of VTX mode
on input B.
S01VTXMODIAx , where x is either 0 or 1
depending on the current status of VTX mode
on input A.
S01VTXMODI*11
S01VTXMODI*00
S01VTXMODI*10
S01VTXMODI*ab , where each of the letters
(a, b, etc.) is either 0 or 1 depending of the
current status VTX mode on the corresponding
input. If this command was sent after the
example above, then the status message
would be S01VTXMODI*01 .
S01VTXMODI*ab , where each of the letters
(a, b, etc.) is either 0 or 1 depending of the
current status VTX mode on the corresponding
input. If this command was sent after the
example above, then the status message
would be S01VTXMODI*01 .
Section 6.3 and Section 6.1
Status Message
S01VTXMODO11
S01VTXMODO1x , where x is either 0 or 1
depending on the current status of VTX mode
on output 1.
for more information