Gaino -- Set Output Gain - Polycom Vortex EF2211 Programming Manual

Example Description Status Message
Set gain on
input A to
S01GAINIA10
10 dB.
Query the
gain on
S01GAINIA?
input A.
Set gain on
all inputs (1,
S01GAINI*6
A, B, T) to 6
dB.
Set gain on
input
channels A
and B to 0
dB and gain
S01GAINI*ìääì
on input
channels 1
and T to 9
dB.
Query gain
on all inputs
S01GAINI*?
(1, A, B, T) .

8.59. GAINO -- Set Output Gain

This command sets or queries the gain (in dB) of the four output channels (1, A, B, T) .
This command is a channel integer command. See
on this type of command. The minimum and maximum values for this command are -100 and 20,
respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
preset.
Example Description
Set gain on output channel A to
S01GAINOA10
10 dB.
Query the gain on output channel
S01GAINOA?
A .
Set the gain on all output
S01GAINO*6
channels (1, A, B, T) to 6 dB.
S01GAINIA10
F01GAINI2xB01GAINITxS01GAINIAxQ01GAINIAxT01GAINITx,
where x is a number between 0 and 30, depending on the current
setting of the gain on input channel A.
S01GAINI*èèèè
S01GAINI*ìääì
S01GAINI*abcd, where a-d are each between ä and ÿ, depending
on the current setting of the gains for each of the four input
channels.
Section 6.3 and Section 6.2
Status Message
S01GAINOA10
, , S01GAINOAx where x is a number between
-100 and 20, depending on the current setting
of the gain on output channel A .
S01GAINO*èèèè
for more information