Macrol -- List All Commmands In A Macro; Macroq -- Execute Macro Quietly; Macros -- Start A New Macro - Polycom Vortex EF2211 Programming Manual

Delete all the commands associated with all 255 macros.
S01MACROK*

8.94. MACROL -- List All Commmands in a Macro

This command lists all the commands in a given macro. For example, assume that a macro has been
defined via the following command sequence.
S01MACROS112
S01MACROA112,MUTEI*0
S01MACROA112,GAINI*0
S01MACROA112,MUTEO*0
S01MACROW112
Once this macro has been defined, issuing the command:
S01MACROL112?
Will result in the following status messages:
S01MACROL112,MUTEI*0
S01MACROL112,GAINI*0
S01MACROL112,MUTEO*0
S01MACROL112

8.95. MACROQ -- Execute Macro Quietly

This command executes the macro corresponding to the specified number. The macro must have
been previously defined and stored in non-volatile memory via the MACROS, MACROA, and
commands. If the specified macro is empty, then an error condition of ERROR#070 will be generated.
When the MACROQ command executes, status messages for all of the commands in the macro will not
be generated. The MACROQ is provided so that a control system can execute a macro and not
generate heavy data traffic from the resulting status messages. Of course, this assumes that the
control system is not interested in any of the acknowledgements. The
to execute the macro without suppressing status messages.
Example Description
Execute macro number 125 without generating any status
S01MACROQ125
messages.

8.96. MACROS -- Start a New Macro

S01MACROK*
MACROW
command can be used
MACROX
Status Message
S01MACROQ125