Polycom Vortex EF2211 Programming Manual page 4

8.59. GAINO -- Set Output Gain
8.60. GAINP -- Set Phone Output Gain
8.61. GAINSIT -- Set From Phone User Tone Gain
8.62. GAINSOT -- Set To Phone User Tone Gain
8.63. GATE -- Query Gating Status Information
8.64. GATEEN -- Enable Automatic Gating Messages
8.65. GMUTEO -- Mute All Outputs
8.66. ID -- Set Device ID
8.67. LABEL -- Set or Query one of the Device Labels
8.68. LAGC -- Enable or Disable Line Input Automatic Gain Control
8.69. LAGCLINKAB -- Enable or Disable Stereo AGC Linking on Inputs A and B
8.70. LAGCMAX -- Set Maximum Allowed Line Input AGC Gain
8.71. LAGCMIN -- Set Minimum Allowed Line Input AGC Gain
8.72. LAGCRATE -- Set Ramp Rate of Line Input AGC
8.73. LEC -- Enable or Disable LEC
8.74. LECMODE -- Set Amount of Double Talk Suppression used in the LEC.
8.75. LI -- Query State of Logic Inputs
8.76. LIA -- Assign Action for when Logic Input is Activated
8.77. LID -- Assign Action for when Logic Input is Deactivated
8.78. LIH -- Assign Action for when Logic Input is Held
8.79. LIEN -- Enable Automatic Logic Input Status Messages
8.80. LIG -- Configure Logic Input Pins Into a Group
8.81. LIK -- Delete One or All Logic Input Pin Commands
8.82. LIM -- Mask Logic Input Pins
8.83. LIN -- Assign Command to Logic Input Group
8.84. LIP -- Set Polarity for Logic Inputs
8.85. LO -- Query or Set Status of Logic Output Pins
8.86. LOA -- Define Behavior for Logic Output Activated State
8.87. LOD -- Define Behavior for Logic Output Deactivated Status
8.88. LOEN -- Enable Automatic Logic Output Status Messages
8.89. LOK -- Delete One or All Logic Output Pin Commands
8.90. LOM -- Mask Logic Output Pins
8.91. LOP -- Set Polarity for Logic Outputs
8.92. MACROA -- Add Command to Current Macro
8.93. MACROK -- Delete One or All Macros
8.94. MACROL -- List All Commmands in a Macro
8.95. MACROQ -- Execute Macro Quietly
8.96. MACROS -- Start a New Macro
8.97. MACROW -- Write Macro to Non-Volatile Memory
8.98. MACROX -- Execute Macro
8.99. METER -- Select which Signal is Displayed on the Front Panel LED Meter
8.100. MGAIN -- Set Crosspoint Gains in Main Matrix or Submatrix
8.101. MGATE -- Select Gated or Ungated Microphone Signal in Matrix
8.102. MIC -- Enable Microphone Gain Stage on Input 1
8.103. MINI -- Enable Modem Initialization String