Ahcp -- Enable Or Disable Call Progress Based Auto Hangup; Ahld -- Enable Or Disable Loop Drop Based Auto Hangup - Polycom Vortex EF2211 Programming Manual

This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
preset.
Example Description
Set AGC ramp rate on input channel
S01AGCRATE13
1 to 3 dB/sec.
Query the AGC ramp rate on input
S01AGCRATET?
channel T .
8.9. AHCP -- Enable or Disable Call Progress Based Auto
Hangup
This command sets or queries the status of the call progress based auto hangup feature. There are
two methods of auto hangup supported: call progress and loop drop. The call progress method listens
for off-hook or busy tones and hangs up the phone if they are detected. The loop drop method looks
for a drop in loop current on the phone line and hangs up the phone if a loop current drop is detected.
The AHCP command controls the call progress auto hangup feature. The
loop drop auto hangup feature. These two features are controlled and implemented independently.
This command is a boolean command. See
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
preset.
Example Description
S01AHCP1 Enable call progress based auto hangup mode. S01AHCP1
S01AHCP0 Disable call progress based auto hangup mode. S01AHCP0
S01AHCP2 Toggle call progress based auto hangup mode.
S01AHCP? Query auto hangup mode.
8.10. AHLD -- Enable or Disable Loop Drop Based Auto
Hangup
This command sets or queries the status of the loop drop based auto hangup feature. There are two
methods of auto hangup supported: call progress and loop drop. The call progress method listens for
Status Message
S01AGCRATE13
S01AGCRATETx where x is a number
between 1 and 5, depending on the current
setting of the AGC ramp rate on input
channel T .
Section 6.1 for more information on this type of command.
Status Message
S01AHCPx , where x is 0 or 1
depending on the current state of the
call progress based auto hangup mode.
S01AHCPx , where x is 0 or 1
depending on the current state of the
call progress based auto hangup mode.
command controls the
AHLD