Gaingil -- Set Gain Of Line Inputs As A Group - Polycom Vortex EF2211 Programming Manual

This command sets the gain of the dial tone received from the phone interface.
This command is an integer command. See
command. The minimum and maximum values for this command are -20 and 20, respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
preset.
Example Description
S01GAINDT6 Set dial tone gain to 6 dB.
S01GAINDT>3 Increase dial tone gain by 3 dB.
S01GAINDT? Query dial tone gain.

8.57. GAINGIL -- Set Gain of Line Inputs as a Group

This command sets the gains of all the line inputs simultaneously. This is different from using a
wildcard, * with the
while the GAINGIL sets only the line inputs.
This command will generate acknowledgements from each of the line inputs separately.
This command is an integer command. See
command. The minimum and maximum values for this command are 0 and 20, respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
preset.
Example Description
S01GAINGIL7 Set gain of all line inputs to 7 dB.
command because that command sets all the mic and line inputs together,
GAINI
Section 6.2 for more information on this type of
Status Message
S01GAINDT6
S01GAINDTx , where x is the new value of the dial
tone gain. If this command was issued after the
example above, then the status message would be
S01GAINDT9 .
S01GAINDTx , where x is the new value of the dial
tone gain. If this command was issued after the
example above, then the status message would be
S01GAINDT9 .
Section 6.2 for more information on this type of
Status Message
S01GAINIA7
S01GAINIB7