Figure 10-45：Aws Reset Variable Action Setting Page; Figure 10-46：Microsoft Azure Function Status Action Setting Page - ICP DAS USA WISE-2841 Series User Manual

ICP DAS WISE User Manual
Follow the steps below:
i
ii Click "OK" button to confirm the settings and return to the
10.2.4.3
You can reset the saved content of the subscribe variable from AWS
when executing a THEN/ELSE Action statement; the editing page is
shown as below:
Follow the steps below:
i Select a pre-set Subscribe variable from the dropdown list of
ii Click "OK" button to confirm the settings and return to the Rule
10.2.5 Microsoft Azure
Click on "Microsoft Azure", 3 options will appear as the following:
"Function Status", "Publish Message" and "Reset Variable".
10.2.5.1
User can execute an action to change the connection operation
between Microsoft Azure and WISE in the THEN/ELSE Action
statement; the editing page is shown as follow:
Figure 10-46：Microsoft Azure Function Status action setting page
http://wise.icpdas.com
Select a pre-set Publish message from the dropdown list of the
"Message" field. The Publish message will be displayed for
you to verify if this is the message you are going to send to.
Rule settings page.
Reset Variable
Figure 10-45：AWS Reset Variable action setting page
the "Variable Name" field. When this action is executed, WISE
would reset the content of the variable, and the evaluation result
of the IF statement which is associated with the variable will be
verified again.
settings page.
Function Status
245