Table of Contents
Advertisement
ICP DAS WISE User Manual
Connect to CGI servers and get the images with CGI commands.
(For example, users can use WISE controllers to connect with
general IP cameras, and get snapshots with CGI commands.)
The Forward Setting page is as below:
Users can upload image files to the FTP server of the WISE controller
(the path is /Sendbox/Telegram), and WISE would send Telegram
messages with the image files to the specified Telegram chat room.
When users connect WISE with iCAM series IP Cameras, the
"Forward" setting page will show the list of connected IP cameras.
Users can enable the "Forward" function to let WISE automatically
send the image files of the IP camera to the specified Telegram chat
room when the IP camera triggered by the following actions:
Use IF-THEN-ELSE rule to trigger a snapshot action of the
connected IP Camera.
The events of IP Camera (Motion Detection, Tampering Detection)
are triggered and the pictures are sent to the WISE controller.
In addition, when the WISE controller connect with a CGI server (ex.
IP camera), and get the snapshots from the CGI server through CGI
commands. These files also can be forwarded to the specified Telegram
chat rooms.
The forward setting of each file source is independent. When the
forward function is enabled, you have to edit an message which will be
sent with the image. The settings steps are as below:
Click on the "Forward" tab at the right-upper corner of the
i
Telegram setting page.
ii
To forward the desired files, please specify and click on the
http://wise.icpdas.com
Figure 9-47：Telegram Forward Setting page(1)
190
Advertisement
Table of Contents
