Table of Contents
Advertisement
ICP DAS WISE User Manual
sending and CGI command receiving. In the CGI command receiving
function, administrator can set a set of account and password in the "CGI
Query Authentication Setting" section to protect the operation of the
WISE, then WISE will only receive the CGI commands with this
account and password information, perform the corresponding
operations, and ignore other CGI commands that do not with this
account and password information. The CGI Query Authentication
Setting page is as follow:
Firewall Setting
WISE provides the firewall mechanism to prevent the intrusion from the
unknown devices on the network. Administrator can set WISE to
response the ping command or not, and use the Blacklist function to
prohibit the connection between WISE and the devices from the specific
IP or domain; or use the Whitelist function to allow the devices from the
specific domain to connect with WISE. The setting page is as shown
below:
The default setting of the firewall function is "Enable" and it would not
reply to the Ping request.
the status of WISE, please check "Enable" in the "Ping Echo" field. To
enable this function, please check "Enable" in the "Function Status" field
and select "Black List"or "White List" in the "Type" field. After press
http://wise.icpdas.com
Figure 5-13：CGI Query Authentication Setting Page
Figure 5-14：Blacklist and Whitelist Setting Page
If you want to use the Ping command to check
46
Advertisement
Table of Contents
