Table of Contents
Advertisement
ICP DAS WISE User Manual
9.11 Ping Setting
WISE provides the Ping function to detect the connection status between
the WISE controller and specified Ethernet devices. The results of Ping
function can be used as IF conditions. The settings steps are as below:
Click on "Add new Ping" to add a new Ping target.
i
After clicking the "Add new Ping", a setting page will appear, input a
ii
name in the "Nickname" field and you could also input the description
of this email in the "Description" field; shown as below:
iii In the "Target" field, enter the IP or the domain name of the target to be
pinged.
iv In the "Timeout" field, enter the timeout value of the Ping function for
waiting the response. The unit will be millisecond (ms).
http://wise.icpdas.com
Figure 9-65：Ping List Page
Figure 9-66：Ping Setting Page
203
Advertisement
Table of Contents
