Table of Contents
Advertisement
ICP DAS WISE User Manual
triggered one more time when the Timer is running, the Timer will
restart again. The "Pause" action will pause the Timer counting
temporarily. The "Resume" action is to let the Timer to leave the
"Pause" mode, and continue the Timer counting for the rest second of
the Timer. The "Reset" action will reset the Timer and stop running
the Timer.
iii Click "OK" button to save the settings. The popup window will be
closed and return to the Rule settings page.
10.2.9 Email
You can send an Email message to an Email group when executing a
THEN/ELSE Action statement; the editing page is as below:
Follow the steps below:
i Select a pre-set Email group from the dropdown list of the "Email"
field. The Email group information will be displayed for you to verify
if this is the Email group you are going to send the message to.
ii Click "OK" button to confirm the settings and return to the Rule
settings page.
10.2.10
CGI Command
Click on "CGI Command", 2 options will appear as the following: "Send"
and "Reset Variable".
10.2.10.1 Send
You can send a CGI Command to a Remote CGI Server device when
executing a THEN/ELSE Action statement; the editing page is shown
as below:
http://wise.icpdas.com
Figure 10-56：Email action setting page
251
Advertisement
Table of Contents
