Table of Contents
Advertisement
ICP DAS WISE User Manual
modules as XV-Board, I-7000 modules, M-7000 modules, (P)ET-7000 modules,
WISE-7100 modules, WF-2000 modules and tM/DL/LC/IR/iSN series modules.
In addition to these ICP DAS modules, WISE-2841M also allows to connect
with devices that support Modbus RTU/TCP Slave protocol for I/O monitoring.
The ability to connect with various types of I/O modules enables flexibility and
scalability for system implementation and allows to meet various requirements
from the clients that enable to find best solutions to meet the requirements.
Please refer to the following table for I/O modules support list of WISE-2841M:
I/O Module Support List
Local I/O
Local Bus
Module
DCON
by RS-485
Modbus RTU
Remote I/O
by RS-485
Module
Modbus TCP
by Ethernet
HTTP
IP Camera
by Ethernet
Connection with IP Camera
WISE-2841M allows connections to ICP DAS iCAM IP Camera series. Users
can trigger the connected IP camera to perform snapshot or video recording with
IF-THEN-ELSE logic rules. WISE-2841M provides the IP Camera Status
webpage to display the event list ordered by time, and you can just click and play
the images or videos on the browser. In additional, WISE-2841M provides
remote backup mechanism to upload images and videos to the remote FTP server
automatically.
Data Logger function
With the microSD card, WISE-22841M provides Data Logger function to
real-time record the I/O data of the controller. The Data Log files can be sent to
http://wise.icpdas.com
ICP DAS：XV-Board series module
ICP DAS：I-7000/DL series module
ICP DAS：M-7000/tM/DL/LC/IR/iSN series
module.
Others：The modules which support the
Modbus RTU Slave Protocol.
ICP DAS：WISE-7100/(P)ET-7000/
WF-2000 series module
Others：The modules which support the
Modbus TCP Slave Protocol.
iCAM-ZMR8422X, iCAM-MR6422X,
iCAM-MR6322
Figure 1-2：IO module support list
Description
Amount
1
Up to
16
modules (Each
COM Port)
Up to
16
modules
Up to
12
cameras
18
Advertisement
Table of Contents
