Figure 6-30：Modbus Rtu Module List Operation Interface - ICP DAS USA WISE-2841 Series User Manual

ICP DAS WISE User Manual
Figure 6-30：Modbus RTU module List Operation Interface
Through the operations of "Setting", "Move Up", "Move Down", "Copy"
and "Remove" functions, user can set up the parameters or adjust the
arrangement order for each Modbus RTU module in the list. Please refer to
the description of "6.3 I-7000/DL DCON Module List Operation Interface"
for detail. After all settings are completed, click "Save" button to save the
changes. Following will describe the setting of the DI/DO/AI/AO channel
of ICP DAS M-7000/tM/DL/LC/IR/iSN series modules and the setting of
the Coil Output/Discrete Input/Input Register/Holding Register of Modbus
RTU modules.
6.5.1 The DI channel setting for ICP DAS module
The ICP DAS Modbus RTU module DI channel setting interface is
shown as below (using M-7060 as an example):
http://wise.icpdas.com
76