Figure 10-65：Internal Register Action Setting Page - ICP DAS USA WISE-2841 Series User Manual

ICP DAS WISE User Manual
Follow the steps below:
i Click "OK" button to confirm the settings and return to the Rule
settings page.
10.2.17 Internal Register
You can modify the value of Internal Register in the THEN/ELSE Action
statement; the editing page for Internal Register Action Setting is shown as
below:
Follow the steps below:
i Select the pre-defined Internal Register from the dropdown lists of the
"Source" and "No" field. The "Local" in the "Source" field mean the
Internal Register is from the Host controller (WISE). The "Remote"
in the "Source" field mean the Internal Register is from the remote
WISE-71xx controller.
has to be enabled in Advanced Setting.
ii Specify the Operator in the "Operator" field. The 6 operators are as
follow:
 "="：Indicate assign the new Internal Register value as the
 "+="：Indicate assign the new Internal Register value as the
 "-="：Indicate assign the new Internal Register value as the
 "*="：Indicate assign the new Internal Register value as the
 "/="：Indicate assign the new Internal Register value as the
http://wise.icpdas.com
Figure 10-65：Internal Register action setting page
Please note: the Internal Register you select
value in "Value" field.
original Internal Register value plus the value in "Value" field.
original Internal Register value minus the value in "Value"
field.
original Internal Register value times the value in "Value" field.
original Internal Register value is divided by the value in
256