Introduction - ICP DAS USA WISE-2841 Series User Manual

ICP DAS WISE User Manual

1 Introduction

WISE-2841M Advanced version IIoT Edge Controller is an Intelligent Web-based
Multi-functions PAC controller designed by ICP DAS that functions as control units
for use in remote logic control and monitoring in various industrial applications.
WISE offers a user-friendly and intuitive HMI interface that allows you to implement
control logic on controllers just a few clicks away; no programming is required. With
this powerful and easy-to-use software, it will minimize the learning curve, shorten
time to market and dramatically reduce the labor and cost spent on system
development.
WISE-2841M is equipped with iMX8 cpu module, which can meet the requirements
of low power consumption and high performance computing power for the embedded
system, and are competent for the complex operations of edge computing and data
logging. WISE-2841M also can store a large amount of log data and image data with
the eMMC memory and MicroSD expansion slot that can be expanded to 2TB.
Through Web browser, you can access Web Server on WISE to perform tasks such as
logic rule edition and download. WISE equips an IF-THEN-ELSE rule engine that
will check whether the rules are valid or not and determine the execution of actions
under specific conditions, for examples: setting up I/O channel values, perform
scheduled and Timer tasks, sending Email under a specific condition. In addition,
through the Modbus TCP/RTU protocol and SNMP protocol, it enables SCADA
software or SNMP Management software to control and monitor I/O channel or
system status on controllers in real time.
In order to meet the requirement of high level information security protection of the
IoT(Internet of Things) system, WISE-2841M provides a variety of encrypted
communication protocols as below. With the HTTPS protocol supported by
WISE-2841M, users can securely access the WISE web page without worrying about
the setting being stolen. Through the SNMP v3 protocol, WISE-2841M can be
perfectly integrated with the IT and Network management system. Users can securely
download data log files stored from WISE through SFTP and FTPS protocols. In each
communication protocol WISE supports, users can set up the relevant protection
password or encryption certificate respectively. In addition, WISE-2841M supports
the firewall setting, which allows users to filter and block the specific domains.
WISE-2841M also support the dynamic blacklist function to automatically add the IPs
which try to login WISE and get failure many times to the blacklist to prevent the
http://wise.icpdas.com
15