ICP DAS WISE User Manual
Figure 6-27:Set up the No. and Address of the Modbus RTU modules
iii. Select the module name: For ICP DAS modules, the user could
select the default model name from the dropdown list. Please input
the nickname for other Modbus RTU modules manually.
iv. Polling Timeout: The time interval for WISE to send command to
the Modbus RTU module and wait for the response, the unit will be
ms. The setting range will be 1~10000 ms.
v. Retry Interval: The time interval to wait for WISE to repeatedly
send command again when WISE sends command to the Modbus
RTU module and get no response. The unit will be second. The
setting range will be 3 ~ 65535 seconds.
vi. Click
the Modbus RTU module, click "Save" button to save the changes.
6.5 Modbus RTU Module List Operation Interface
After the Modbus RTU modules are added to the Module RTU module list
via auto scan or manual work, the Modbus RTU modules will be listed as
below:
http://wise.icpdas.com
Figure 6-28:Select the model of the Modbus RTU Module
to add the Modbus RTU module to the list. After adding
Figure 6-29:Add the Modbus RTU Module manually
75