ICP DAS WISE User Manual
configuration of other channels, and after all channel settings are
completed, click "OK" button to save the changes and return to
Modbus RTU Module List.
Please Note:
1. To set up the Power On value of the DO channels on
M-7000/tM/DL/LC/IR/iSN modules, please use DCON Utility to
set the value.
2. The DO channels on M-7000/tM/DL/LC/IR/iSN modules do not
offer the Pulse Output function.
6.5.3 The AI channel setting for ICP DAS module
The ICP DAS Modbus RTU module AI channel setting interface is
shown as below (using M-7002 as an example):
Figure 6-33:ICP DAS Modbus RTU module AI Channel Setting page
The settings are as below:
Nickname: For user to define nickname for the module and the
Temperature Unit: Specify temperature measurement unit for
http://wise.icpdas.com
I/O channels, these nicknames will be displayed on the "Channel
Status" and "Rule Setting" pages.
modules that allows for temperature measurement. The
79