Then/Else Action Setting - ICP DAS USA WISE-2841 Series User Manual

ICP DAS WISE User Manual

10.2 THEN/ELSE Action Setting

To add a THEN/ELSE Action, please select and set the Action from the
dropdown list in the "Add a new Action" field under the THEN/ELSE
Action setting section. THEN/ELSE Action provides the following Action
setting options:
 ICP DAS Module
 Modbus Module
 IP Camera
 Amazon Web Services
 Microsoft Azure
 IBM Bluemix
 MQTT
 Timer
 Email
 CGI Command
 Data Logger
 SNMP Trap
 LINE Notify
 Bot Service
 Telegram
 Re-boot System
 Reset modem
 Internal Register
 Rule Status
 Delay
If the WISE is connected to ICP DAS I/O modules or Modbus TCP/RTU
modules, the setting options for I/O channel information (DI Counter, DO,
AO, Coil Output and Holding Register) will be automatically displayed on
the dropdown list. In addition, If therer is ICP DAS iCAM IP camera
connect to WISE, the related setting options of IP camera event(Snapshot,
Video and OSD message) will also be automatically displayed in the
dropdown list.
To include subjects other than modules mentioned above in the
THEN/ELSE Action statement; they have to be pre-defined in Advanced
Setting first. The setting options of the subjects that already being defined
in Advanced Setting will appear on the dropdown list of THEN/ELSE
Action. Select the Action option from the dropdown list in the "Add a new
http://wise.icpdas.com
233