Figure 10-34：Di Counter Action Setting Page - ICP DAS USA WISE-2841 Series User Manual

ICP DAS WISE User Manual
Action" field under the THEN/ELSE Action setting section, a window will
pop up for you to edit detailed information. The THEN Action statement
will be executed only when the result of IF condition statement is found
"true"; otherwise the ELSE Action statement will be executed. In order to
meet application requirement, for some Actions,
execute the Action one-time or
THEN/ELSE Action are as follow:
 One-Time: when the IF Condition is TRUE, this Action will be
executed once and only once. This Action will not be executed again
until the IF Condition turns to be TRUE again.
 Repeat: when the IF Condition is TRUE, this Action will be executed
repeatedly until the IF Condition turns to be FALSE.
The setting options of THEN/ELSE Action are as follow:
10.2.1 ICP DAS Module
Click on ICP DAS Module, 4 options will appear as the following: DI
Counter, DO, AO and Infrared.
10.2.1.1
You can reset DI counter of ICP DAS I/O Module, in the
THEN/ELSE Action statement; the editing page for DI counter
Action is shown as follow:
Follow the steps below:
i Select the DI channel to reset DI counter from the dropdown list
ii Click "OK" button to confirm the settings and return to the Rule
10.2.1.2
You can execute an action in DO channel of ICP DAS I/O Module in
the THEN/ELSE Action statement; the editing page for DO Action is
shown as follow:
http://wise.icpdas.com
DI Counter
Figure 10-34：DI Counter action setting page
of channel field in the "Module & Channel" section.
settings page.
DO
WISE offers options to
repeatedly. The setting options of
234