Transferring Data From Instrument To Computer - Thermo Scientific NanoDrop Lite Plus User Manual

1 NanoDrop Lite Plus User Guide

Transferring Data From Instrument to Computer

Transferring Data From Instrument to Computer
16 NanoDrop Lite Plus User Guide
Table 4.Protein Concentration Range
Lower
Sample
Detection
Type
Limit
BSA 0.06 mg/mL 45 mg/mL
IgG 0.03 mg/mL 22 mg/mL
Lysozyme 0.015
mg/mL
Note Absorbance reported is normalized to a 1.0 cm (10.0 mm) pathlength for
all measurements.
The NanoDrop Lite Plus automatically stores the last 1000 measurements in the
internal memory. A USB memory device can be used to transfer these
measurements from the NanoDrop Lite Plus to a computer for archival or further
analysis.
The internal software of the NanoDrop Lite Plus does not support connecting the
NanoDrop Lite Plus to an external hard drive. Only USB memory devices (memory
sticks) should be used to transfer data.
Sample data is automatically saved on the instrument.
To transfer data from the instrument to a USB memory device:
1. Insert the device.
2. From the Home screen, select History.
3. Select Export.
This file is a .csv format and can be transferred to a computer to be opened in
Microsoft Excel® or other compatible application.
NOTICE A maximum of 1000 measurements will be saved in the instrument
and are available to be transferred to a USB memory device at any time.
Measurement #1001 will replace #1.
Upper
Typical reproducibility
Detection
(10 replicates, SD = mg/mL; CV=%)
Limit
±0.10 mg/mL (for 0.10-10 mg/mL
samples); ±2% for samples
>10 mg/mL
±0.10 mg/mL (for 0.10-10 mg/mL
samples); ±2% for samples
>10 mg/mL
11.4 ±0.10 mg/mL (for 0.10-10 mg/mL
mg/mL samples); ±2% for samples
>10 mg/mL
Thermo Scientific