Table of Contents
Advertisement
1
NanoDrop Lite Plus User Guide
Maintenance
Printer Output
Maintenance
Calibration
26
NanoDrop Lite Plus User Guide
This allows labels to be printed from previously measured samples stored in the
instrument's memory. Use Previous and Next to display the sample data to
print.
Note The printer labels are cryogenic, and per manufacturing specifications they
perform well under a wide temperature range: 70° C to –196° C.
The label will print out the sample name entered on the instrument.
Labels can be used on a 1.5 mL tube or in a lab notebook.
The round sticker next to the label fits the top of a 1.5 mL tube and is provided to
use as needed for sample identification.
All NanoDrop Lite Plus instruments are calibrated at the time of manufacture and
include a Factory Test Report. Should recalibration ever become necessary, this
procedure must be performed by Thermo Fisher Scientific or the authorized service
providers at our dealers. Recalibration is extremely rare and should only be
performed when the unit fails the performance verification or when critical optical
components are repaired or replaced.
Thermo Scientific
Advertisement
Table of Contents
