Configure Wi-Fi data storage on the remote computer
Thermo Scientific
–
from remote computer, open NanoDrop One Viewer software
–
choose File (menu) > Set Up Wi-Fi Data Storage (the following screen is displayed)
–
enter the following information:
–
Instrument IP address (displayed on instrument in Settings > System, see
previous section; if IP address is valid, Status column shows "Valid IP Address")
–
unique Instrument Name (in case there are multiple instruments in the same lab
on the same network)
–
PC Name, such as the computer's assigned name or an invented name (the name
you enter will appear in the "select a data storage location" list box on the
instrument (see the next section)
18
Learning Center
Set Up the Instrument
NanoDrop One User Guide
181