Thermo Scientific NanoDrop Lite Plus User Manual page 23

Thermo Scientific
The printer assembly will not work until it is properly docked to the NanoDrop
Lite Plus.
5. Plug in the power supply and allow NanoDrop Lite Plus to initialize.
6. Open the printer cover by pushing the two release buttons at the rear while
simultaneously swinging the panel back.
7. Unwrap paper roll, insert spool and set the paper roll squarely inside the printer
paper roll, in the orientation shown on the icon located on the paper holders.
The paper should be coming out from under the roll toward the feed slot.
8. When you hear the paper feed mechanism move, the printer is ready to load the
paper; push the end of the paper into the paper feed slot.
Paper is properly inserted when it engages the print head mechanism and
comes out from the slot at the top of the printer.
1
NanoDrop Lite Plus User Guide
Using NanoDrop Lite Plus With Optional Printer
NanoDrop Lite Plus User Guide 23