3. Configuration of digital power meter
With the collected information, it is possible to configure the digital power meters. If transducers are used instead of digital power
meters, they must be configured instead.
Depending on the type of power meter, the configuration menu is accessed from the front, and configuration is done from the front.
The programming of transducers and power meters are not done from the DEIF PC Utility SW.
On DEIF power meters, for instance MIB 7000C, the configuration menu is typically accessed by pressing "H"+ "VA" simultaneously.
Please refer to the programming manual of your specific meter.
COMMISSIONING GUIDELINES 4189341077D EN
Page 9 of 58