Table of Contents
Advertisement
15. Operating modes
All modes are described in the designer's reference handbook of the ASC and the AGC in more details.
15.1 Stand-alone system
In a stand-alone system, the requested mode is adjusted in the menu 6071.
Parameter Range
Island mode
Fixed power
6071
Mains power export
Power management
Set points off-grid
In off-grid mode, the set point will be as high as possible but will be curtailing the PV in order to keep the genset minimum load.
There are two different min. load settings in case you have different engine types.
COMMISSIONING GUIDELINES 4189341077D EN
Menu group Notes
A stand-alone system can only run in Island mode, Fixed power, or mains power
6070
export.
Page 48 of 58
Advertisement
Table of Contents
