Multi Roi Mode; Multi Roi Setting Parameters - JAI GO-5000M-PGE-UV User Manual

GO-5000M-PGE-UV User Manual (Ver. 1.2)

Multi ROI Mode

On this camera, the width and height of 5 separate ROIs within the full image area can be set as
required. Each image can be overlapped. The location of each ROI can also be set as required. The
Multi ROI data is output as an independent frame.
The Multi ROI mode is enabled if [Video Sending Mode] is set to "Multi ROI".
Multi ROI
Index Selector
Index 1
Index 2
Index 3
Index 4
Index 5

Multi ROI Setting Parameters

Multi ROI command
Command
Multi ROI Index
Multi ROI Width
Multi ROI Height
Multi ROI Offset X
Multi ROI Offset Y
Multi ROI Index Max
Note: If binning mode is used, the maximum values are adjusted accordingly.
Width
2560
2560
2560
2560
2560
Parameter
Index 1 ~ 5
16 ~ 2560*
1 ~ 2048*
0 ~ 2560* - [Sequence ROI Width]
0 ~ 2048* - [Sequence ROI Height]
1 ~ 5
Multi ROI
Height
2048
2048
2048
2048
2048
Select the index to be configured.
<Set to each Index>
Set the width value.
<Set to each Index>
Set the Height value.
<Set to each Index>
Set the Offset X value.
<Set to each Index>
Set the Offset Y value.
Set the number of indexes to be used.
- 73 -
Main Functions
Offset X Offset Y
0
0
0
0
0
Description
0
0
0
0
0