Preparation; Preparation Process; Step 1:Installing The Software - JAI GO-5000M-PGE-UV User Manual

Preparation

Preparation Process

Step 1 Installing the Software (first time only)
Install the software for configuring and controlling the camera (eBUS SDK for JAI) on the computer.
Connecting Devices
Step 2
Connect the lens, LAN cable, AC adapter, computer, and other devices.
Verifying Camera Operation
Step 3
Verify whether the camera is turned on and ready for use.
Step 4 Verifying the Connection between the Camera and PC
Verify whether the camera is properly recognized via Control Tool.
Changing the Camera Settings
Step 5
Refer to the procedure for changing the output format setting as an example, and change various
settings as necessary.
Adjusting the Image Quality
Step 6
Refer to the procedures for adjusting the gain, white balance, and black level as examples, and adjust
the image quality.
Saving the Settings
Step 7
Save the current setting configurations in user memory.
Step 1: Installing the Software (first time only)
When using the camera for the first time, install the software for configuring and
controlling the camera (eBUS SDK for JAI) on the computer.
❖ When you install eBUS SDK for JAI, eBUS SDK for JAI player will also be installed.
1
Download the eBUS SDK for JAI from the JAI website.
URL https://www.jai.com/support-software/jai-software
2
Install eBUS SDK for JAI on the computer.
— 9 —
GO-5000M-PGE-UV