Preparation - JAI GO-5000M-PGE-UV User Manual

GO-5000M-PGE-UV User Manual (Ver. 1.2)

Preparation

Read this section to learn how the camera connects to devices and accessories. The preparation
process is described below.
Step 1: Install the Software (First Time Only)
Install the software for configuring and controlling the camera (eBUS SDK for JAI) on the
l
computer.
Step 2: Connect Devices
Connect the lens, LAN cable, AC adapter, computer, and other devices.
l
Step 3: Verify Camera Operation
Verify whether the camera is turned on and ready for use.
l
Step 4: Verify the Connection between the Camera and PC
Verify whether the camera is properly recognized via Control Tool.
l
Step 5: Change the Camera Settings
Refer to the procedure for changing the output format setting as an example and change
l
various settings as necessary.
Step 6: Adjust the Image Quality
Refer to the procedures for adjusting the gain and black level as examples and adjust the
l
image quality.
Step 7: Save the Settings
Save the current setting configurations in user memory.
l
- 16 -
Preparation