Table of Contents
Advertisement
Chapter 4 RAID Modes and Drive Management
3
Select the drive to dismount and click Dismount Drive.
4
The "Confirm Operation" screen will open. Enter the confirmation number, then click OK.
5
The process is complete once you close the confirmation window that appears.
When the dismounting process is finished, it is safe to unplug the drive. Disconnect the drive from the TeraStation.
Note: To remount the drive, unplug it and wait for approximately three minutes, then plug it back in.
Checking Drives
A drive check tests the data on a drive on the TeraStation or one that is connected via USB for integrity. Detected
errors are fixed automatically. With large drives, a drive check may run for many hours. Shared folders cannot be
accessed during a drive check. Do not turn off the TeraStation until the drive check is finished. Follow the procedure
below to run a drive check.
1
From Settings, click Storage.
2
Click the settings icon (
external drive.
) to the right of "Drives" to check an internal drive or "USB Drives" to check an
68
Advertisement
Table of Contents
