Changing The Ip Address - Buffalo TeraStation 5020 User Manual

Chapter 9 Network Settings
4
Select or enter the desired MTU size and click OK.
5
The process is complete once you close the confirmation window that appears.
Connection
Jumbo Frame
Jumbo Frame
Compatible Switch
Jumbo Frame
Jumbo Frame
Compatible Switch
Jumbo Frame
Jumbo Frame
Incompatible Switch
Jumbo Frame
Jumbo Frame
Incompatible Switch
Note: Make sure the TeraStation's MTU size is smaller than the hub or router's. Larger MTU sizes may not transfer the
data to the TeraStation correctly.

Changing the IP Address

Normally, the TeraStation's IP address is set automatically by a DHCP server on your network. If you prefer, you can
set it manually. An easy way to do this is to change it on NAS Navigator2. The procedure to change the IP address in
Settings is below.
Jumbo Frame
Compatible PC
Jumbo Frame
Incompatible PC
Jumbo Frame
Incompatible PC
Jumbo Frame
Compatible PC
236
Transmission
Transfer data using
jumbo frames.
Transfer data
without using
jumbo frames.
Transfer data
without using
jumbo frames.
No data can be
transferred.