Table of Contents
Advertisement
Chapter 4 Storage Management
5
When the dismounting process is completed, it is safe to unplug the drive. Disconnect the drive from the
TeraStation.
Note: To remount the drive, unplug it and then plug it back in.
Checking Drives
A drive check tests the data on a drive in the TeraStation or one that is connected via USB for integrity. Errors are
fixed automatically. With large drives, a drive check may run for many hours. Shared folders cannot be accessed
during a drive check. Do not turn off the TeraStation until the drive check is finished. Use the procedure below to run
a drive check.
1
From Settings, click Drives.
2
Click Drives to check an internal drive or USB Drives to check an external drive.
3
Select the drive or array to test, then click Check Disk.
54
Advertisement
Table of Contents
