Table of Contents
Advertisement
Chapter 2 Getting Started
4
Reset Button
Press and hold down this button with something pointed to initialize the TeraStation's admin username and
password, two-factor authentication settings, IP settings, SSL, and service port restriction settings to their
factory default values. The effects of this button can be changed in Settings.
During initialization, the TeraStation will beep and the
initialization finishes, the
5
Function Button
Use this button for rebuilding RAID arrays, configuring failover, stopping the TeraStation's beeping, and
initializing settings using a USB drive.
6
LAN LED
When any LAN ports are connected, this LED glows blue.
7
Info LED
If there is a status message, the info LED will light up amber. Check the Settings interface or NAS Navigator2 to
see the status message.
8
Drive Status LED
Glows blue when drives are detected. It blinks when drives are accessed.
9
Drive Error LED
Normally, this LED is extinguished. If a drive fails, its LED will turn red.
10
USB 2.0 Port
Compatible USB UPS devices can be connected. USB drives and USB hubs are not supported.
11
Power Connector
Use the included power cable to connect to a UPS, surge protector, or outlet.
12
Beep Off Button (for Power Supply Unit)
If a PSU error occurred, you will hear the beep from the TeraStation. To stop beeping, press this button.
13
Fan (for Power Supply Unit)
Spins to prevent overheating inside. Do not block the fan.
14
Factory use only.
15
USB 3.2 Gen 1 Port
Compatible USB drives, USB memory devices, and USB UPS devices can be connected. USB hubs are not
supported.
16
LAN Port 1 (1GbE)
Connect an Ethernet cable to use this port for your network. It is available for communicating at max. 1000
Mbps.
17
LAN Port 2 (1GbE)
Connect an Ethernet cable to use this port for your network. It is available for communicating at max. 1000
Mbps.
18
LAN Port 3 (10GbE)
Connect an Ethernet cable to use this port for your network. It is available for communicating at max. 10 Gbps
if using the included Ethernet or category 6A cable.
I23
message will disappear.
I23
message will appear as a notification. When
16
Advertisement
Table of Contents
