Table of Contents
Advertisement
Chapter 4 RAID Modes and Drive Management
5
Change the "Error Behavior" option to "Shut down" and click OK.
6
The process is complete once you close the confirmation window that appears.
Rebuilding the RAID Array Automatically for the TS51220RH
If auto RAID rebuild is enabled, RAID arrays will rebuild automatically after a failed drive is replaced. You may enable
or disable auto RAID rebuild by following the procedure below.
Note: This function is only for the TS51220RH TeraStation model. Other models will not display this function in
Settings.
1
From Settings, click Storage.
2
Click the settings icon (
) to the right of "RAID".
53
Advertisement
Table of Contents
