Checking Drives - Buffalo TeraStation TS3400D User Manual

Dismounting from Settings
1
In Settings, click Drives.
2
Click Drives to dismount an internal drive or USB Drives to dismount an external drive.
3
Select the drive to dismount and click Dismount Disk. It will take about 30 seconds for the drive to be
dismounted.
4
When the following message is displayed, it is safe to unplug the drive.
Note: To remount the drive, unplug it and then plug it back in.

Checking Drives

A disk check tests the data on a drive in the TeraStation or connected via USB for integrity. Errors are fixed
automatically. With large drives, a disk check may run for many hours. Shared folders cannot be accessed during
a disk check. Do not turn off the TeraStation until the disk check is finished. Use the procedure below to run a disk
check.
46