Table of Contents
Advertisement
Chapter 10 Advanced Features
• If there is not enough space to save logs, the
by deleting the current file access logs. If no free space is made available elsewhere, older logs will automatically
be deleted.
• If the shared folder to which logs are saved was created on a drive or RAID array, and that drive or RAID array is
later changed using RMM, the log folder will be automatically changed to the system area. The
also appear as a notification.
• You cannot delete a RAID array, format a drive, or change a folder name while file access logs are being saved to
the shared folder.
Updating the Firmware
If a new firmware version is available, a message is displayed when you access Settings. To either manually or
automatically update the firmware, follow the appropriate procedure below.
Notes:
• If all drives and RAID arrays on the TeraStation have LVM enabled but no LVM volumes have been created, you will
not able to update the firmware from Settings.
• Settings will not be available while the firmware is updating. Don't try to access Settings from another computer
until the update is finished.
Updating Manually Using Settings
To update the firmware from Settings, follow the procedure below. In such a case, you need free space of 2 GB or
more on the TeraStation.
1
From Settings, click Management.
2
Click the settings icon (
3
Click OK.
I70
message will appear as a notification. If it does, free up space
) to the right of "Update".
252
I72
message will
Advertisement
Table of Contents
