Configuring Low Drive Space Alerts - Buffalo TeraStation 5020 User Manual

Network attached storage
Hide thumbs Also See for TeraStation 5020:
Table of Contents

Advertisement

Chapter 4 RAID Modes and Drive Management
2
Move the RAID scanning switch ( 
3
Click the settings icon ( 
4
Click Edit.
5
Select when to run the scan and click OK.
6
The process is complete once you close the confirmation window that appears.
Notes:
• Select the "Immediately" checkbox to run a RAID scan immediately.
• To stop a RAID scan, click Cancel RAID Scan.

Configuring Low Drive Space Alerts

You can configure the TeraStation to notify you when it is running low on free space, either by having a message
displayed on the Dashboard in Settings or having the TeraStation send you an email notification. This function is
applicable to internal drives, RAID arrays, and NAS volumes on the TeraStation.
Note: If you have configured low drive space alerts and created iSCSI volumes on the LVM-enabled area, the
message will appear as a notification.
1
From Settings, click Storage.
 ) to the
 ) to the right of "RAID Scanning".
64
position to enable RAID scanning.
I65

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ts5420dnTs5420rnTs5820dnTs51220rh

Table of Contents