Shutting Down The Terastation Automatically If An Error Occurs - Buffalo TeraStation 5020 User Manual

Chapter 4 RAID Modes and Drive Management
3
Choose a RAID array.
4
Select a RAID mode and the drives to be used, then click Create RAID Array.
5
Depending on the RAID configuration, the message will appear. Read the message carefully and click Yes to
proceed.
6
The "Confirm Operation" screen will open. Enter the confirmation number, then click OK.
7
The process is complete once you close the confirmation window that appears.
When the RAID array has been created, next create a shared folder by referring to the
section in chapter 3.

Shutting Down the TeraStation Automatically If an Error Occurs

This function will shut down the TeraStation automatically if an error occurs on a drive that is used in a redundant
RAID array.
51
"Adding a Shared Folder"