Chapter 4 RAID Modes and Drive Management
6
Read the message carefully and select the checkbox, then click OK.
7
The process is complete once you close the confirmation window that appears.
Configuring Actions for If a Drive Used for the RAID Array Has Not
Been Detected
You can configure actions to be taken by the TeraStation if a drive used for the RAID array cannot be mounted when
booting.
Hiding the Confirmation Screen
Configure to display or hide the confirmation screen that showcases the actions for if a drive used for the RAID array
cannot be mounted when booting. The confirmation screen is configured to appear by default. To hide the screen,
follow the procedure below.
1
From Settings, click Storage.
2
Click the settings icon (
) to the right of "RAID".
55