Table of Contents
Advertisement
Chapter 9 Network Settings
Note: If the TeraStation is being used as an iSCSI drive, to change the settings, navigate to Storage > iSCSI in Settings
and move the iSCSI switch to the off position temporarily before changing settings.
1
From Settings, click Network.
2
Click the settings icon (
3
Click Edit.
4
Clear the "DHCP" checkbox and enter the desired IP address and its subnet mask.
5
Select "User (static)" from the drop-down list for both the "Gateway Owner" and "DNS Owner" options, then
enter the desired default gateway address and DNS server addresses.
6
Click OK. The process is complete once you close the confirmation window that appears.
Notes:
• Only one default gateway and DNS address can be configured for all LAN ports. Different network addresses
cannot be assigned to the LAN ports.
• Do not set the IP address of the same segment for all LAN ports. This may cause unstable network
communication.
• Network services such as SMB or FTP will restart when the Ethernet cable is disconnected/reconnected or if a
network issue occurs. You can specify the time to delay the restart at the "Services Restarted After" option.
) to the right of "IP Address".
237
Advertisement
Table of Contents
