Table of Contents
Advertisement
Chapter 13 Appendix
Chapter 13 Appendix
LCD Panel
Modes
The LCD panel can be cycled through different modes by pressing the display button.
LCD Message
LANx
Not Connected
LANx Half Duplex
10 Mbps
LANx Full Duplex
10 Mbps
LANx Half Duplex
LANx
100 Mbps
Note: The "x"
LANx Full Duplex
indicates the
100 Mbps
number of the
LAN port where
LANx
the Ethernet cable
1000 Mbps
is connected.
LANx
2.5 Gbps
LANx
5 Gbps
LANx
10 Gbps
LANx
Port Trunking
Model Name/
TS5420D
Firmware Version
FW Version 1.00
Hostname:
Hostname
TS5420Dxxx
Date Time
Date and Time
YYYY/MM/DD
hh:mm
Description
Not connected to a network.
Connected at 10 Mbps half duplex.
Connected at 10 Mbps full duplex.
Connected at 100 Mbps half duplex.
Connected at 100 Mbps full duplex.
Connected at 1000 Mbps.
Connected at 2.5 Gbps.
Connected at 5 Gbps.
Connected at 10 Gbps.
Displays if port trunking is configured.
Displays the model name and firmware
version.
Note: This example is using the TS5420DN
TeraStation model. The numbers and letters
after "TS" may vary depending on your
model.
Displays the hostname.
Note: The "xxx" is assigned using the last
three-digits of the MAC address.
Displays the date and time set on the
TeraStation.
281
Corrective Action
Connect an Ethernet
cable to the LAN
port.
-
-
-
-
-
-
-
-
-
-
-
-
Advertisement
Table of Contents
