Table of Contents
Advertisement
Chapter 13 Appendix
LCD Message
I55 Recovery
Not
Authorized
I64 Cloud
Sync Failure
I66 Free
Space at 1%
or Less
I70 No Space
to Save Logs
I72 Log
Folder Now
System Area
I75 Some
Items Not
Migrated
Information Events
After you change any settings, one of the following messages will appear on the LCD panel and the info LED will
glow amber. If there is a corresponding corrective action described below for the code, try it first. If the code is still
displayed after trying the corrective action, contact Buffalo technical support for assistance.
You can also confirm the current status from the Dashboard in Settings or by using NAS Navigator2. If NAS
Navigator2 displays the status as an unknown error, check the Dashboard in Settings for the status details.
You can click the "Clear" button to delete messages from the Dashboard.
Note: The "x" in the LCD message is the number of the drive, array, or job involved in the process.
LCD Message
I01
Rebuilding
System Array
I13
Formatting
Array x...
I14 Checking
Array x...
I15 Scanning
Array x
Data...
I16 Creating
Array x...
I17 Resyncing
Array x...
Description
Authentication during initialization of
settings failed.
Connecting to the cloud storage service
failed.
The free space has decreased to 1% or less.
There is not enough space to save file
access logs.
The target folder for saving logs has been
changed to the system area.
Some items could not be migrated.
Description
Checking the system area.
Formatting the RAID array.
Checking the RAID array.
Examining the error status of the RAID
array.
Note: Transfer speeds are slower during
the examination process.
Creating the RAID array.
Resynchronizing the RAID array.
Note: Transfer speeds are slower during
resynchronization.
Corrective Action
Settings can only be restored for the
TeraStation whose settings were originally
saved.
Open Settings and check the status of
the job that failed for the cloud service.
Refer to the error log on the job list of the
specific cloud storage service and check
the cause of the error.
Increase the free space.
Delete file access logs to free up space.
Reconfigure the settings by referring to
the
"Changing Archive Rules for File Access
Logs"
section in chapter 10.
Refer to the
detailed corrective actions.
Corrective Action
-
-
-
-
-
-
284
NAS migration guide
for the
Advertisement
Table of Contents
