Chapter 11 Drive Replacement and Troubleshooting
3
Push a drive's unlock button and swing the lock mechanism out.
4
Pull out the drive cartridge and remove it from the TeraStation.
5
Insert the drive back into the same slot with the lock mechanism remaining open.
Push here to insert.
6
Swing the lock back down until it clicks into place.
7
Repeat steps 3–6 for all other installed drives.
8
Once every drive has been re-inserted, close the front cover.
9
Press the power button on the TeraStation.
10
The process is complete when any error messages disappear.
271