Table of Contents
Advertisement
Chapter 13 Appendix
LCD Message
I41 Push Func
to Start
Recovery
I42 Preparing
Recovery
I43
Unsupported
Hardware
I46 Migrating
RAID Array
x...
I47 Don't
Power Off
System!
I48 Push Func
to Start
Failover
I50
Failover in
Maintenance
Mode
I51
Initializing
Failover...
I52 New
Firmware
Available
I61 Drive
Setup Mode
I65 Free
Space at
Threshold
I71 Old Logs
Removed
I73 Migration
Processing...
I74 Migration
Finished
Default Settings
Administrator's Name
Password
Shared Folders
Description
Press the function button to start the
settings initialization process.
Preparing to start the settings initialization
process.
The TeraStation was started from the USB
initialization drive, but the settings cannot
be initialized from this USB initialization
drive.
Data migration or conversion (RAID
migration) is in progress.
Data migration or conversion (RAID
migration) is in progress.
This TeraStation is ready to become
the failover backup device for the main
TeraStation.
Failover maintenance is in progress.
Initializing the failover configuration.
A new firmware version has been released.
The unit is in drive setup mode.
The free space has decreased past the
configured threshold percentage.
The space is occupied so older logs were
removed.
Data or settings migration is in progress.
Data or settings migration has finished.
admin
password
"share" for both Windows and macOS computers.
Note: The recycle bin is enabled by default.
Corrective Action
-
-
-
Do not turn off the TeraStation's power.
Do not turn off the TeraStation's power.
Press and hold down the function button
of the failover backup TeraStation until it
stops beeping to accept failover backup
status.
Do not turn off the TeraStation's power.
Do not turn off the TeraStation's power.
Update the firmware by referring to the
"Updating the Firmware"
10.
Recover from drive setup mode by
referring to the
section in chapter 11.
Increase the free space or change the
threshold to a lower value.
Delete file access logs to free up space.
-
Refer to the
detailed corrective actions.
286
section in chapter
"Power LED Keeps Blinking"
NAS migration guide
for the
Advertisement
Table of Contents
