Table of Contents
Advertisement
Chapter 5 Backup
9
Select the original backup destination as the backup source, then select an iSCSI file I/O volume as the backup
destination.
10
Click OK, then click OK again.
11
The process is complete once you close the confirmation window that appears. The backup job will be added
to the backup jobs list.
The backup data will be restored on the backup destination after the backup job has run. If the backed up iSCSI
volume is smaller than the backup source, and there is not enough space on the backup source to accommodate
the backup data, the restore process will finish, but the backup source iSCSI volume will become corrupted.
Backup Logs for If Backup Fails
I54
If backup fails, the
message will appear as a notification and the following backup error codes may be
displayed in the "Status" field. Read the description and try the respective corrective actions for each error to resolve
it.
Code
Description
The backup destination USB
Code 3
drive could not be found.
Corrective Action
Check that the backup destination
USB drive is connected to the
TeraStation properly.
127
Log Example
rsync error: errors
selecting input/
output files, dirs (code
3) at main.c(634)
[Receiver=3.1.0]
Can't write to backup
destination(target disk
is broken?).
Advertisement
Table of Contents
